Dry SEAL

Description:

Dry Seal 800 W is a high quality aqueous dispersion sealer manufactured from selected emulsionpolymers.Dry Seal 800 W is to be used for sealing porous surfaces prior to applying Drymix finishing systems suchas Dry Décor, Dry Putty and Dry Fix systems.Dry Seal 800 W is water and weather resistant, specially formulated to provide good impregnation ofsubstrates and improve strength of weak substrates.
‍
Composition:

Dry Seal 800 W consists of a high-performance acrylic copolymer emulsion with fine particle size andspecial additives to enhance penetration of cementitious substrates.
‍
Advantages:

• Reduces surface salt and efflorescence.
• Reduce surface absorption.
• Excellent bonding and impregnation characteristics to different porous surfaces such as cementitiousplaster, cementitious putty, gypsum board, masonry brick, concrete blocks, concrete …etc.
• strengthens weak surfaces prior to applying Drymix finishing
• For indoor and outdoor use.
• Resistant to rain, yet permeable to water vapors.
• Alkaline resistance

Description:

Dry Seal 801 is high quality colorless impregnating sealer and a protective coating for cement-basedsurfaces.Dry Seal 801 is a fast-drying solvent-based acrylic copolymer that imparts a highly durable yet flexible,hard and tough surface coating.Dry Seal 801 protects the surfaces against dust stains and has an excellent abrasion resistanceproperties.Dry Seal 801 is of high penetration characteristics into the cement-based surfaces.
‍
Composition:

Dry Seal 801 is manufactured from a high-performance acrylic-based copolymer with a fast solventrelease.
‍
Advantages:

• Excellent impregnation characteristics.
• Ideal for strengthening porous surfaces.
• Becomes an integral part of the surface and will not delaminate (peel of) from the substrate.
• Excellent weather and abrasion resistance.
• Easily applied by brush or roller and dries quickly to a hard durable semi-gloss film.

Description:

Dry Seal 822CL is as single component colored, based on low viscous modified silane siloxane, whichpenetrates into porous substrates and then react to produce a bonded water repellent lining. Althoughallow water vapor to escape from the substrate. It significantly reduces the absorption of water.
‍
Composition:

Chemical characteristics: Silane- Siloxane.
‍
Advantages:

• Penetrates into the substrates
• No staining, friend to environment (solvent free)
• Good protection against deicing salts and freeze thaw cycle.
• Allow water vapor to escape from the structure.
• Resistant to atmospheric contaminants.
• Minimizes efflorescence.
• available in a wide range of colors (Drymix Colored chart)

Description:

Dry Seal 860 is a high quality aqueous (watery) dispersion sealer manufactured from a selected emulsionpolymers.Dry Seal 860 is used for sealing porous surfaces prior to applying Drymix finishing systems such as DryDécor and Dry Putty.Dry Seal 860 is water and weather resistant, specially formulated to provide good impregnation for thesurfaces and improve strength of any weak area.
‍
Composition:

Dry Seal 860 consists of a high performance acrylic copolymer emulsion with fine particle. size to enhancepenetration of cementitious substrates.
‍
Advantages:

• Reduces surface salt and efflorescence.
• Reduce surface absorption.
• Excellent bonding and impregnation characteristics to different porous surfaces such as cementitiousplaster, cementitious putty, gypsum board, masonry brick, concrete blocks, concrete …etc.
• strengthens weak surfaces prior to applying Drymix finishing systems
• For indoor and outdoor use
• Resistant to rain, yet permeable to water vapors.

Description:

PentoSeal WB is a water based sealing and penetrating alkali resistant primer. It can be applied toconcrete, renders, plaster boards and cement boards. manufactured from selected emulsion polymers.PentoSeal WB is to be used as a primer for Carboguard-E acrylic coatings when used on highly alkalinesubstrates such as cement renders, plasters, concretes with a high cement content or cement with a highlevel of alkalis.PentoSeal WB is water and weather resistant, specially formulated to provide good impregnation ofsubstrates and improve strength of weak substrates.
‍
Composition:

PentoSeal WB consists of a high-performance copolymer emulsion and special additives to enhancepenetration of cementitious substrates.
‍
Advantages:

• Reduces surface salt and efflorescence.
• Reduce surface absorption.
• High penetration.
• Can be used with anti-chloride, anti-carbonation treatments
• Excellent bonding and impregnation characteristics to different porous surfaces such as cementitiousplaster, cementitious putty, gypsum board, masonry brick, concrete blocks, concrete …etc.
• Strengthens weak surfaces prior to applying Drymix finishing
• For indoor and outdoor use.
• Resistant to rain, yet permeable to water vapors.
• Alkaline resistance
• Breathable
• Environmentally friendly